£ GBP
€ EUR
$ USD
Description
The Bakers Pride AS-M1005X is a genuine OEM FDTH range gas thermostat that controls oven temperature from 300°F to 650°F. It features a 48-inch capillary (sensor/bulb tube), and is used in commercial deck/transportable ovens. This thermostat ensures safe and accurate high-heat performance; using the correct OEM piece prevents overheating, maintains consistency in cooking, and meets safety/gas regulatory requirements.
📌 Details:
| Spec | Value |
|---|---|
| Part Number | AS-M1005X (replaces old M1005X, BKPM1005X etc.) |
| Type | Gas Thermostat, FDTH style |
| Temperature Range | 300°F – 650°F |
| Capillary Length | 48″ |
| Bulb / Sensor | 3⁄16″ × 14-3⁄4″ nickel bulb (approx) in those listings that give dimensions |
| Gas Connections | ½″ FPT in & out |
| Dimensions / Size | Length approx 18.6 in, Width ~5 in, Height ~4.95 in for the M1005X version. |
| Replaces / Alternate Part Numbers | Baker’s Pride: BKPAS-M1005X, BKPM1005X; Lincoln LIN369006; Comstock Castle COM17030; AllPoints 8015067 / 801-5067 / 461752 / 461076 / F10528K; also alternate 46-1752, 46-1076 etc. |
💡 Tech Tip:
-
When installing, make sure you route the capillary properly to avoid sharp bends or contact with hot surfaces that could damage it.
-
Adjust the bypass screw properly: some thermostats allow gas flow even in the “off” position if this set-screw (bypass) is backed out too far. After fitting, adjust for correct bypass flame as per manufacturer’s spec.
-
Ensure the knob / dial is the correct style (some models use #22-1011 or #22-1202 depending on manufacturer) so the markings correspond to the temperature range.
📌 Note:
OEM / previous part numbers are useful for cross-reference, but always check the model & serial number of the oven to ensure compatibility. The “high heat” or “FDTH” version is different to the lower temp or standard thermostats, in both internal calibration and safety/capillary design.
